How to Fix Windows 10 Boot Loop with Command Prompt?

Windows 10 boot loop is a frustrating issue that can prevent your computer from starting up properly. It occurs when the system gets stuck in a continuous reboot cycle, making it impossible to access the desktop. However, you can fix this problem using the Command Prompt, a powerful tool in Windows that allows you to execute various commands and troubleshoot system issues.

In this tutorial, we will guide you through the steps to fix the Windows 10 boot loop using the Command Prompt. By following these instructions, you can successfully resolve the boot loop issue and regain access to your computer without the need for advanced technical knowledge.

Step 1: Access the Advanced Startup Options:
– Start your computer and when the Windows logo appears, press and hold the power button until the system shuts down.
– Repeat this process two more times until you see the "Preparing Automatic Repair" message.
– On the third attempt, the Automatic Repair screen will appear. Select "Advanced options" to proceed.

Step 2: Open Command Prompt:
– In the Advanced Startup Options, click on "Troubleshoot" to enter the troubleshooting menu.
– From the troubleshooting menu, select "Advanced options" once again.
– Finally, choose "Command Prompt" to open the Command Prompt window.

Step 3: Execute System File Checker (SFC) Scan:
– In the Command Prompt window, type "sfc /scannow" and hit Enter.
– The System File Checker (SFC) scan will begin, checking for any corrupted system files and attempting to repair them automatically.
– Let the scan complete. This process might take a while, so be patient and wait for the results.

Step 4: Perform Check Disk (CHKDSK) Scan:
– In the Command Prompt window, type "chkdsk /f /r C:" and press Enter. Replace the "C:" with the drive letter where your operating system is installed if necessary.
– You will be prompted to schedule the disk check on the next system restart. Type "Y" and press Enter.
– Restart your computer to begin the disk check process. The scan will attempt to fix any disk errors and recover data if possible.

Step 5: Rebuild the Boot Configuration Data (BCD):
– In the Command Prompt window, type the following commands one by one and press Enter after each one:
– bootrec /fixmbr
– bootrec /fixboot
– bootrec /scanos
– bootrec /rebuildbcd
– The above commands will rebuild the Boot Configuration Data (BCD) to resolve any issues that might be causing the boot loop problem.
– Once the process is complete, restart your computer and check if the boot loop is resolved.

1. Allows you to fix the boot loop issue without the need for additional software.1. Advanced commands can be challenging for inexperienced users.
2. Can potentially repair corrupted system files and disk errors.2. In some cases, the boot loop might persist despite attempting these fixes.
3. No need to reinstall the operating system, preserving user data and settings.3. Certain complex boot loop causes might require professional assistance.

Video Tutorial:How to boot in BIOS cmd command?

How do I fix Bootloop without factory reset?

A bootloop refers to a situation where a device continuously restarts, preventing it from booting up properly. It can be frustrating but can usually be resolved without performing a factory reset. Here are some steps you can try to fix a bootloop without resorting to a factory reset:

1. Perform a soft reset: Start by holding the power button and volume down button (or the power button and home button on older devices) simultaneously for about 10-15 seconds until the device restarts. This can often break the bootloop cycle.

2. Boot into Safe Mode: If the soft reset doesn’t work, try booting your device into Safe Mode. For most Android devices, press and hold the power button until the power off menu appears. Then long-press the "Power off" option until you see a prompt to enter Safe Mode. Once in Safe Mode, you can uninstall any recently installed apps that may be causing conflicts or issues.

3. Clear cache partition: If Safe Mode doesn’t help, another step to try is clearing the cache partition. The method may slightly vary depending on the device, but generally, you need to turn off the device and then press and hold the power button and volume up button (or the power button and home button) simultaneously to access the recovery mode menu. From there, navigate to the "Wipe cache partition" option using the volume buttons and confirm the selection with the power button. Once the cache is cleared, reboot the device.

4. Flash the firmware: If none of the above steps work, it might be necessary to flash the firmware using the manufacturer’s official firmware files and appropriate software tools. This process varies depending on the device and its manufacturer, so it’s crucial to follow detailed instructions specific to your device and model. Flashing the firmware can replace the existing software, which should resolve any underlying issues causing the bootloop.

Remember, attempting to fix a bootloop without a factory reset may require technical knowledge and carries some risks, such as data loss or potential damage to the device. If you’re uncertain or uncomfortable with these steps, it’s advisable to seek assistance from an authorized service center or professional technician.

Is there a way to fix boot loop?

Boot loops can be frustrating, but there are several ways you can try to fix them. Here are steps you can take to troubleshoot and resolve a boot loop issue on your device:

1. Perform a hard reset: Start by forcing your device to restart. On most devices, you can do this by pressing and holding the power button and the volume down button simultaneously until your device shuts down and then restarts.

2. Check for software updates: Ensure that your device is running the latest version of the operating system. Manufacturers often release software updates that address bugs and improve system stability. If an update is available, install it and see if it resolves the boot loop issue.

3. Clear cache partition: On Android devices, you can try clearing the cache partition. To do this, boot your device into recovery mode by following a specific key combination (which can vary, so refer to your device’s manual or search online). Once in recovery mode, navigate to the option to wipe the cache partition and then reboot your device.

4. Boot into safe mode: Safe mode allows your device to start with only the essential system functions, which can help identify if a third-party app is causing the boot loop issue. To boot into safe mode, power off your device and then power it back on. Once the manufacturer’s logo appears, press and hold the volume down button (or another specific key combination) until the device finishes booting. If the device starts up fine in safe mode, it may indicate that a recently installed app is causing the problem.

5. Factory reset: If none of the above steps work, you may need to consider performing a factory reset. Keep in mind that this will erase all data and settings on your device, so it’s important to back up your data beforehand. You can usually perform a factory reset through the device’s settings or by using a specific key combination to access the recovery mode.

6. Seek professional help: If you’ve tried the above steps with no success, it may be time to contact the manufacturer’s support or visit an authorized service center. They will have the expertise to diagnose and resolve hardware-related issues that may be causing the boot loop.

It’s worth noting that these steps may vary depending on the specific device and operating system, so it’s always recommended to refer to your device’s manual or seek online resources specific to your device for more accurate instructions.

How to repair PC by cmd?

Repairing a PC using the command prompt (cmd) can be a useful troubleshooting technique if you’re encountering software-related issues. Here’s a step-by-step guide on how to perform basic repairs using cmd:

1. Open the Command Prompt: Press the Windows key + R to open the Run dialog box. Type "cmd" and press Enter to open the command prompt.

2. Run System File Checker (SFC) Scan: Type "sfc /scannow" in the command prompt and press Enter. This command verifies the integrity of system files and repairs any corrupt files it finds. It may take some time to complete the scan.

3. Run Deployment Image Servicing and Management (DISM) Tool (optional): If the SFC scan doesn’t fix the issue, you can try running the DISM tool to repair the system image. Type "DISM /Online /Cleanup-Image /RestoreHealth" in the command prompt and press Enter. Allow the process to complete. Note that this command requires an internet connection to download any necessary files.

4. Check Disk for Errors: Type "chkdsk C: /f" in the command prompt and press Enter. Replace "C:" with the drive letter where your operating system is installed, if different. This command will check the disk for errors and attempt to fix them.

5. Restore System Files: If you suspect that a specific system file is causing the issue, you can use the "sfc /restorehealth" command to repair system files using the Windows Update service. Type "sfc /restorehealth" in the command prompt and press Enter.

6. Restart Your PC: After completing the repairs, it’s a good idea to restart your computer to allow the changes to take effect.

Note that these steps are intended for basic repairs and may not fix complex hardware or major software issues. Additionally, it’s important to create a backup of your important files before attempting any repairs.

Remember, when performing repairs using cmd, it’s crucial to follow instructions carefully and ensure that you have a backup plan in case anything goes wrong. If you’re unsure or uncomfortable with using the command prompt, it’s always advisable to seek professional assistance from an experienced technician.

How do I fix boot menu loop?

When encountering a boot menu loop, it can be frustrating as it hampers your ability to access your device. Here are steps you can take to troubleshoot and fix the issue:

1. Power cycle your device: Before diving into more complicated solutions, start by performing a simple power cycle. Turn off your device completely by holding down the power button, and then power it back on after a few seconds. This can sometimes resolve temporary glitches causing the boot menu loop.

2. Check hardware connections: Ensure that all external devices or peripherals connected to your device (such as USB drives, external hard drives, or SD cards) are disconnected. Sometimes faulty connections can interfere with the boot process and result in a loop.

3. Reset BIOS settings: Access the BIOS (Basic Input/Output System) menu usually by pressing a specific key (such as F2 or Del) repeatedly during the initial boot stage. Once in BIOS, locate the option to "Reset to default settings" or "Load default settings" and select it. Save the changes and exit the BIOS. This step helps to rule out any misconfigurations causing the boot loop.

4. Boot into Safe Mode: If your device supports Safe Mode, try booting into it. Typically, you can activate Safe Mode by pressing a specific key combination during startup, such as holding down the Shift key. Safe Mode loads the operating system with minimal drivers and services, allowing you to diagnose and troubleshoot any software-related issues.

5. Use Windows Recovery: If you are using a Windows-based device, you can utilize the Windows Recovery Environment. Restart your device and repeatedly press a specific key (such as F8 or F11) to access the recovery options menu. From there, choose "Troubleshoot" > "Advanced options" > "Startup Repair" or "Automatic Repair." Follow the on-screen prompts to initiate the repair process.

6. Perform a system restore: If the boot menu loop commenced after a recent software installation or update, performing a system restore can be a viable solution. Utilize the recovery options mentioned in the previous step, select "System Restore," and choose a restore point before the issue occurred.

7. Reinstall or repair the operating system: If none of the above steps have resolved the problem, it might be necessary to reinstall or repair your operating system. Consult your device’s user manual or the manufacturer’s support website for specific instructions on how to proceed with an operating system reinstallation or repair.

It’s important to note that the above steps are general troubleshooting techniques, and the specific instructions may vary depending on the device’s make, model, and operating system. If you are uncertain or uncomfortable performing these steps yourself, consider seeking professional assistance from a technician or contacting the device manufacturer’s support team.

How do I cancel startup repair?

As a tech blogger, here’s how you can cancel startup repair:

1. Wait for the initialization process: When you encounter a startup repair process upon booting up your computer, it’s important to initially allow the repair process to complete its diagnostic and repair procedures. In certain cases, it might automatically solve any issues, and you won’t need to cancel the repair.

2. Restart your computer: If you wish to cancel the startup repair, you can simply restart your computer by selecting the restart option from the repair screen.

3. Use the advanced boot options: If a regular restart doesn’t cancel the startup repair, you can access the advanced boot options to interrupt the repair process. To do this, follow these steps:

a. Power on your computer and continuously press the F8 key until you see the Advanced Boot Options menu appear.

b. Using the arrow keys, navigate to the "Cancel Repair" option and press Enter.

4. Seek professional assistance: If you’ve tried the above steps and still can’t cancel the startup repair or you suspect a larger issue with your computer, it is advisable to seek assistance from a professional technician or contact the manufacturer’s support team.

Remember, these steps may vary depending on the specific operating system and manufacturer of your computer. It’s always good to refer to the user manual or reach out to professional support for your specific device if you encounter any difficulties.

How do I fix Windows 10 infinite boot?

One common issue with Windows 10 is the infinite boot loop, where the system repeatedly restarts without reaching the desktop. Here are some steps you can take to try and fix this problem:

1. Initiate Automatic Repair: When the system is stuck in an infinite boot loop, it will often detect the issue and attempt to start Automatic Repair. Allow it to run and follow the on-screen instructions.

2. Enter Safe Mode: If Automatic Repair fails to fix the issue, try booting into Safe Mode. Restart your computer and repeatedly press the F8 key during the boot process. This will bring up the Advanced Startup Options menu. From there, select Safe Mode and press Enter.

3. Check for incompatible drivers: Sometimes, outdated or incompatible drivers can cause boot issues. In Safe Mode, open the Device Manager and look for any devices with an exclamation mark indicating a problem. Right-click on those devices and choose "Update driver" to search for the latest compatible drivers.

4. Run System File Checker (SFC): In Safe Mode, open the Command Prompt as an administrator. Type "sfc /scannow" and press Enter. This command will scan system files for any errors or corruption and attempt to repair them.

5. Use System Restore: Windows 10 has a built-in feature called System Restore that allows you to revert your system to a previous working state. In Safe Mode, search for "System Restore" and follow the on-screen instructions to choose a restore point.

6. Disable automatic restart: Sometimes, the system restarts too quickly for you to properly see any error messages. In Safe Mode, right-click on the Start button, select "System," and click on "Advanced system settings." Under the "Startup and Recovery" section, click on the "Settings" button. Uncheck the box next to "Automatically restart" under the "System failure" section.

7. Repair corrupted system files: If none of the above steps work, you can try repairing corrupted system files using the Deployment Image Servicing and Management (DISM) tool. Open the Command Prompt as an administrator, type "DISM /Online /Cleanup-Image /RestoreHealth," and press Enter. This process may take some time to complete.

8. Perform a clean install: If all else fails, a clean installation of Windows 10 may be necessary. Ensure you have a backup of your important files and follow the appropriate steps to reinstall the operating system.

Remember, these steps are general solutions and may not work in all cases. If you’re not comfortable performing these troubleshooting steps, it’s recommended to seek professional help or contact Microsoft support for further assistance.